Ritchey Engraving - Dremel - 12 Volt Lithium-Ion Cordless
Ritchey Engraving - Dremel - 12 Volt Lithium-Ion Cordless grinder variable speed rotary tool to engrave ear tags
Description of 12 volt Dremel cordless rotary tool to engrave Ritchey layered ear tags:
The 8220 Dremel comes with 1 battery pack and a 1/4" high speed cutter.
Cordless 12V High-Performance Variable Speed Rotary Tool With 12V Lithium-Ion Battery – Runs At 5,000 To 35,000 Rpm. Includes 1/4″ HS Cutter Bit. The Cordless Dremel Is Great For Do-It-Yourself Engraving Right In The Field.
Battery-operated multi-purpose tool Dremel 8220 for a variety of applications thanks to the variable speed adjustment of up to 33,000 rpm. Always ready to use and ideal for demanding applications thanks to the new 12 V/2 Ah Lithium-ion battery with Electronic Cell Protection and a charging time of approximately 1 hour. Tool-free change of accessories by the EZ-Twist connection cap with integrated collet chuck key. Maximum performance even under load due to high performance motor with motor brake. A perfect view of the workpiece thanks to the 360° movable LED-lamp at the front of the device.
Highlights & Details
12 V/2 Ah Lithium-ion battery
variable speed of 5,000 to 33,000 RPM
tool-free change of accessories by the EZ-twist
360° movable LED lamp for an optimum view of the workpiece
Facts
Lithium-ion technology
Variable speed of 5,000 to 33,000 RPM
motor brake
EZ-Twist connection cap with integrated collet chuck key
360° movable LED light
Spindle lock lock
Soft grip handle in all areas.
Key Benefit Ritchey Dremel 8100 cordless grinder:
- Lithium-ion battery maintains charge up to 2 years while in storage
- Our cordless rotary tool's charging time is just 1 hour
- Two-year warranty
Information on DIY tag engraving:
When numbering tags yourself, use the dremmel as an eraser. Slowly grind away the top layer until the center layer is exposed. You will then want to go back over the numbers with the dremmel in order to expose the maximum amount of the center layer. Remember when using the dremmel do not push too hard because the dremmel may grind through to the other side. Stencils are not available to be used in preperation of engraving. However, it is recommended that the numbers be written on the surface of the tag to act as guidelines. This will assist in creating a more legible number during the engraving process.
