Ritchey Universal Jumbo Ear Tag Only - must purchase buttons seperately
Universal Jumbo SIZE 2-7/8"W x 4-3/4"L.
Ritchey Ear Tags, created by Founder and Owner Gene Ritchey, are the only tags which allow the numbers or letter to be permanently engraved into the dual colored tag. This unique method is done when producers engrave through the top color layer, exposing the center layer - permanently embedding the number or letter into the tag.
Ritchey Ear Tags are unsurpassed in retention, legibility and durability, Ritchey Tags save producers both time and money. Ritchey Tags are part of the only identification system that allows for the do-it-yourself or factory-done pre-numbering, while guaranteeing that the numbers or letters engraved remain permanent.
Engrave permanent numbers with any high-speed engraving tool, exposing the contrasting core color. Installs with any two-piece button system. Features hard locking disc, long life and durability, high visibility, reinforced neck, super flexibility, and more writing area.
Use the chart below to help you choose your Tag colors. The outside tag color is the color of your tag, and the core color will be revealed when you engrave on your tag.
Jumbo Tags
Number size is 1 ¾ inches, 1 ¼ inches or ¾ inches high.
Tags with 1 ¾ inch numbers:
Tags must be numbered 000-999 (There must be 3 numbers on the tag.)
Tag can have a letter above the numbers in the shoulder of the tag.
Tags with 1 ¼ inch numbers:
Tags can have up to 4 digits: 0-9999. Single numbers can be done, but there must be at least 2 numbers on the tag or the numbers will be off-centered.
Tags can have a letter above the numbers in the shoulder of the tag, a die above or below the numbers, OR a letter to the left or right of the numbers IF tag has 3 digits or less
Tags with ¾ inch numbers:
Tags can have up to 4 digits: 0-9999. Single numbers can be done, but there must be at least 2 numbers on the tag or the numbers will be off-centered.
Tag can have a letter above the numbers in the shoulder of the tag OR a die above or below the numbers.
Tag can have numbering on both sides of the tag. Numbers must offset - at the bottom of the tag on one side and the top of the tag on the other (so as not to compromise the composition of the tag). Numbers will be 1 ¼ inches tall.
